Category: Accessories

This is a screw-on foot, the shank is included as part of the foot unit. To attach it to a machine, you need to unscrew and remove your machine foot holder, then attach this adjustable zipper foot and tighten the foot holder screw.

Click here to find out more

The Quilt Binder Set is the perfect accessory for quick and trouble-free binding, with a superior design based on industrial binding attachments. The cone at the front of the fabric holder feeds and folds the fabric for a ½” finished binding.

Click here to download

The Even Feed Foot, sometimes referred to as the Walking Foot, is designed with a set of feed dogs which allow the fabric to feed without shifting and eliminates puckering as you stitch multiple fabric layers or challenging fabrics such as teddy bear fur, vinyl, suede or leather.

Click here for more information

The 3-way cording foot will hold one, two or three fine cords or threads. Because they are attached to the foot, the required design can be easily followed and the cords are perfectly placed.

A variety of utility or decorative stitches can be sewn over the cords to couch them onto base fabrics.

Click here for more information

Ruffler Foot… pleats & gathers, its easy and quick!

Click here for more information

Now, you can glide easily over even the most challenging fabrics like leather, vinyl, and plastic: with a non-stick surface on both the foot and the needle plate!

Click here for more information

Starting from top, left to right: Quilt Binder Attachment
AcuFeed Flex™ Foot, Darning Foot, Free Motion Quilting ZigZag Foot QV 9mm – Pivot Models, AcuFeed Flex™ ¼’’ Foot, Single Acufeed Flex™ Foot

1. Quilt Binder Attachment: The Quilt Binder Set is the perfect accessory for quick and trouble-free binding, with a superior design based on industrial binding attachments. The cone on the front of the fabric holder feeds and folds fabric for a ½” finished binding. Two upper screws on the binder allows you to adjust the fold of the fabric – set them at the same length for a straight stitch, or set the bottom a bit further than the top for a blanket stitch. Use the quilt binder set to produce ½’’ binding which can handle quilt fabric and other thick fabrics. A The set creates straight line binding for large quilts and also adds an eye-catching accent to any small items such as placemats and hot pads.
2. AcuFeed Flex™ Foot: The twin type dual feed attachments give you superior stability by taking full advantage of a wider stance. Engage the exclusive AcuFeed™ /AcuFeed Flex™ fabric feeding system and feel your project moving together under the needle with perfect precision.
3. Darning Foot: Sometimes referred to as the embroidery foot, the darning foot is used for ‘free hand’ embroidery and darning to ensure proper stitch formation, minimize skipped stitches and puckering and also protect your fingers while you move the fabric freely under the needle. Especially beneficial to those just learning how to do free hand embroidery. The open toe version greatly improves visibility of stitches and is especially popular with quilters.
4. Free Motion Quilting ZigZag Foot QV 9mm – Pivot Models: The clear view foot moves smoothly over uneven layers such as fabric with cording or ribbon, and can also be used with zigzag stitches.
5. AcuFeed Flex™ ¼’’ Foot: A popular foot with patchworkers for that essential 1/4-inch seam. The guide on the foot enables you to sew a perfect 1/4 inch seam every time. The guide can also be used wherever a 1/4-inch seam is called for but the markings on the needle plate cannot be used, such as when completing a flat-felled seam.
6. Single Acufeed Flex™ Foot: In addition to the original twin type, single type feet can now be used, expanding sewing possibilities. AcuFeed Flex™ keeps your thickest, trickiest layers moving in perfect sync with the feed dogs. You’re going to love the new AcuFeed Flex™ feet for stitching your fluffiest quilts, installing zippers, or matching seams!

When doing projects with small pieces or fine threads a small pair of scissors are a must. Janome has excellent little scissors that allow you to get nice and close to your work. These small pink scissors are approximately 4’’ with a sharp point on the end. This style of scissor makes cutting out awkward areas very simple. Whether you are a machine embroider cutting away applique or cutwork or a dressmaker trimming threads and cutting curves this pair of scissors are an excellent investment. Head into your local Janome retailer to purchase your very own pair today.

Part number: 803 813 007 – Embroidery Scissors – Pink

No matter how advanced or sophisticated the sewing machine has become, the basic principle of selecting the correct needle to be used must still apply. Quite simply, the finer the fabric the finer the needle, the heavier the fabric the heavier the needle, but whether fine or heavy it is important to replace your needles regularly. In order to achieve the very best results from a Janome Machine, we recommend that you use the correct Janome needle for the fabric you are using and that they are changed approximately every 8 – 10 hours. Using other brands of needle may cause stitching issues as they differ in length to Janome needles and are structurally different.

From years past when it was an exclusively hand-sewn affair, embroidery was not only a practical part of everyday life but was also used to add a touch of elegance. Over time embroidery has evolved to include beautiful multi-hued patterns and various combinations of threads and fabrics.

Enjoy the wonderful world of embroidery with high quality Janome embroidery thread collections. Start with the highest quality fabrics and threads to ensure your creations maintain their beauty for years to come. Carefully plan your embellishments and test before sewing your actual project. Then let the precision of your Janome sewing machine and accessories do the work.

Each box contains 27 assorted coloured threads and a bobbinfil reel.

Box 1

Box 2

Box 3